[UPD] SnapStack - A Modular Storage Bin Organizer by pops

pops

Tools>Organizers

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

One of each storage box - 0.16mm layer, 3 walls, 15% infill

Designer

11 h

2 plates

4.3(4)

Single Container 0.2mm layer, 2 walls, 10% infill - A1 mini

2.3 h

1 plate

5.0(4)

Single Container Mid 0.2mm layer, 2 walls, 15% infill

2.1 h

1 plate

5.0(3)

0.2mm layer, 3 walls, 15% infill

4.2 h

2 plates

5.0(1)

Click to see more

Boost

234

382

528

186

Released

Description

[UPDATE]
• Triple Containers added due to the requests of some people
• I also added a 4x4 container for large items for heavy duty usage.
• Clearances Improved

A model to store screws, nuts, nails and other small parts lying around your lab. The parts interlock using the dovetails.

PLEASE PRINT THE TEST FILE FIRST
The parts are supposed to have friction, but should slide in easily. If your test parts dont fit you can adjust this using XY compensation in the slicer.

Print settings:
Infill: 20%
Walls: 2/3
Speed: Slower speed is highly reccomended as the overhangs turn out nicer
Layer Height: Any up to .25

Support: Not needed

Comment & Rating (18)

@okywan

Print Profile

One of each storage box - 0.16mm layer, 3 walls, 15% infill

Missing Model Parts:The small one is not the one pictured, doesn't have a grip but a hole. Prints fine anyway

@Geist296

Boosted

This is great! Just printed a bunch. although a larger one maybe three wide would be helpful. Is that possible to make? I don't have the skill in modeling a remix.

The designer has replied

@pops

Hey, thanks for the appreciation! What you requested is now published in the latest update

@Geist296

Boosted

Replying to @pops :

Thanks so much!

@lnminh1998

Print Profile

Single Container Mid 0.2mm layer, 2 walls, 15% infill

easy print and use. but Please adjust it deeper to be able to hold items such as lipstick.

@pops

Thanks for the tip. This isn't intended for that purpose, however you could use the double container, or stretch the model in one direction in the slicer since it shouldnt affect the geometry much