I have build most of the parts but not yet assembled. Some components will require minor post processing but I will update them soon so that it can assembled with less hassle!

tip. Be careful when assembly the suspension components since there are quite thin and frigile more like a scale plastick kit.

Hopefully I will be able to finish it and make a guide so that you can enjoy assembly with confidence!

Please share and let me know what you think!

Additionally I suggest to use super glue (preferably gel)

M3x12 mm screws for the front wheels

M3x16 mm screws for the rear wheels

Pay attention when tightening the wheels as it might cause the suspension to snap. I made them thin to look more realistic.

If you let the screws slightly loose they will be able to rotate as well. You may also might need to drill the holes if the tolerances are tight.

Main body wheels, and joint

0.12-0.2 mm layer height

2 walls

15-30% infill

Suspension and spoilers.

0.12-0.16 mm layer height for the suspension components

100% infill

Thanks!!