Universal puck screen holder for coffe machines

Introducing my Universal Puck Screen Holder, meticulously designed to accommodate the needs of every coffee enthusiast. Crafted to perfection, this holder ensures a seamless coffee preparation experience without compromise.

Key Features:

• Universal Compatibility: Designed to fit a wide range of puck diameters and thicknesses, ensuring unparalleled compatibility with various coffee machines. In the provided photo, I use a 51mm diameter puck with a thickness of 0.8mm. However, the spaces are 2 and 2.5mm wide, allowing for the insertion of classic 1.7mm thick pucks. Additionally, the cuts are approximately 10mm deep by 40-50mm in length, accommodating even a 58mm puck.

• Multi-Puck Capacity: With the ability to hold up to three pucks simultaneously, my holder caters to both single coffee lovers and professionals requiring higher capacity.

• Functional Design: Equipped with raised feet and drainage holes, this model ensures that my pucks remain dry and ready for use, preserving the flavor and freshness of your coffee.

• Versatile and Durable: Printable in any material, PLA is particularly recommended for its versatility and ease of printing. Supports are required, and printing it upside down is advised to minimize support usage and facilitate removal.

Object Size:

• Height: 15mm (21mm with feet)
• Diameter: 60mm

Printing Time: Approximately 1 hour with PETG

Infill: 10%

Printing Method: This model is optimized for FDM 3D printing.

Supports: Yes. You use less if you rotate the model 180 degrees (i.e. with the feet upwards)

Material: Suitable for both PLA and PETG filament. PETG is recommended for its food-safe properties, although both PLA and PETG are suitable. PLA is preferred for ease of printing.

Used Printer: Anycubic Kobra 2 Neo.

Used Filament: Anycubic PLA/PETG.