Incense Holder - Corbu

Our fourth incense holder version. Enjoy our Corbu tower to transform the environment into an atmosphere of meditation and relaxation. An incense holder with a minimalist and elegant design inspired by the modern architecture of the 50s. Clean lines and geometric shapes combine to create a unique piece that will enhance any space.

Download and print it in your favorite color!

Instructions for use: This kit consists of 3 parts: a base or container, a perforated tube, and a cap.

Note: during the start of printing the perforated tube, you will see that a square is also printed inside it, a little more than 1.5 cm high, with the aim of improving adhesion during printing and that it can be easily removed after printing.

You can fill the base with river sand up to the visible inner mark of the container, insert the incense into the center of the container with sand, check that it is as vertical as possible, light the tip of the incense and put the tube and the cap. By removing the cap you can control the position and progress of the incense.

Important: do not use without supervision.

Visit us on Instagram and support us with a like.

Thank you.

Filament: PLA, Petg, or similar

Recommended fill density:
Base Fill: >20
Tube Fill: >15
Lid Fill: >20

We recommend using brim for all pieces

No support.