Morrow

DSRecord 2_05043c55-7a66-4e2e-a32c-acd3845a8be7.jpg

DSRecord 1_fd2faa50-5f21-4a28-aa5a-5deee5a51ec8.jpg

Dave Strider Record render 1_16b2b7e6-8ffa-4b2a-9d74-d8e11e73cdbb.png

Dave Strider Record render 2_076e66dd-468d-44f5-a96b-8b5fcbc6ca8e.png

DSRecord 2_05043c55-7a66-4e2e-a32c-acd3845a8be7.webp

DSRecord 2_41a9528f-9827-48af-bb02-262006cf8e03.webp

Print profile_d2e332b3-a8e7-4352-a7e0-5a90bb664708.webp

plate_1.webp

plate_1.png

I printed this with the standard 0.2mm Strength from the X1C, and modified the following parameters:&nbsp;Top surface pattern: Hilbert CurveBottom surface pattern: Archimedean SpiralSparse infill density: 12%Sparse infill pattern: Triangles&nbsp;I have not personally had any issue with adhesion while using a textured build plate, but if you do a brim will stop any warping on the edges.

0.2mm layer, 6 walls, 12% infill

Made this for someone who was cosplaying Dave Strider at a convention. Simple design that utilizes the multicolour function of the printers.

Dave Strider Record keychain

Global

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

Car Record player

Straw Hat Keychain

LoveLink Keychain

Cute Calico Cat Keychain