I really liked this project because it taught me how to seek out more information on using SVG files in Bambu Studio. Once I started to dissect this project after printing it I both realized I had an error on my original print as well as decided to make an additional cover.

My initial print was on my Textured PEI plate and part of me is thinking that the increased heat might have made the white filament darken in certain places. Combine that with my hack job at wiring up the LCD strips I wanted to try again.

This print was done on a fully glued bambu cool plate but I think (as you might see in the photos) I put way too much glue and/or was sloppy with it's application and thus you can see lines in the surface. Nothing a quick shot with a heat gun soft cloth won't fix (we shall see).

For whatever it's worth, I'm printing these for a friend who is a really kind, gentle, nice person. While I might not subscribe to the same ideals she does, I see the love and devotion she pours into her faith and that resonates through her actions.

I wish you all well and above all a huge thanks to A1 Graphix for sharing your work.

Cheers