A small sign that reads “Hoppy Easter” with a bunny for the Easter holiday. Uses AMS by default (single STL available in Raw files).

• Cute to hang on the wall or prop up on a shelf. It will also stand up on its own, the bottom is technically flat under the “easter/bunny" part, but it may be wobbly if you have an elephant's foot which will make the back a touch longer than the front, forcing it forward.
  
• The 3MF is a multi-color file, the color goes all the way through. I up wall overlap a bit to make sure pieces stay together.
  
• There is ironing on top surfaces and I always warn people to only use ironing settings you've calibrated on your machine, as results will vary wildly between filaments and machines. You can also turn it off of course.

If you'd rather do a color-swap at layer height, please download the RAW file (STL) which is an all-together single piece. If you use my settings (0.16 starting layer, I always use a smaller layer for more successful adhesion, and 0.24 layer height otherwise as this does not require precision) those color changes are at Layer 28 and Layer 43. Your mileage may vary if you change settings.