The Spengler family returns to where it all started – the iconic New York City firehouse – to team up with the original Ghostbusters, who’ve developed a top-secret research lab to take busting ghosts to the next level. But when the discovery of an ancient artifact unleashes an evil force, Ghostbusters new and old must join forces to protect their home and save the world from a second Ice Age - source: IMDB

This is the first shadow box that combines regular, one color and multicolor plates with HueForge plates. This design is based on one of the official movie posters.

The design requires the following colors

• Black
• Dark Grey
• White
• Bright Red
• Blue
• Dark Blue
• Pastel or light blue
• Natural PLA color or transparent

These are the filaments I've used

• R3D PLA Black
• Fillamentum ExtraFill PLA Iron Grey
• R3D PLA White
• Fillamentum ExtraFill PLA Traffic Red
• Fillamentum ExtraFill PLA Sky Blue
• Fillamentum ExtraFill PLA Pearl Night Blue
• Bambu Lab PLA Matte Ice Blue
• Fillamentum ExtraFill PLA Natural

You can find the box to display this set here: https://makerworld.com/en/models/13471

The box with lid and the wall mountable box are both Patreon/Printables/Thangs subscriber exclusives. (Box with lid also available for individual purchase on Cults3D)

Print instructions

No need for AMS or MMU. All color changes are done using filament swaps.

Plates 1, 2 and 3

• Layer height: 0.2mm
• Initial layer height: 0.16mm
• 100% infill
• Arachne wall generator
  
• Plate 1:
  - Start with Dark Grey
  - at layer #3 - 0.56mm swap to White
  - at layer #6 - 1.16mm swap to Bright Red
  - at layer #8 - 1.56mm swap to Blue for the rest
  
• Plate 2:
  - Black
  
• Plate 3:
  - Dark Grey

Plates 4 and 5 (HueForge plates)

Since these are rather complex STL files, slicing can take a while. Some of the STL files may report an error, please do not fix them! You will lose details if you do. The errors are a result of the complex STL file Hueforge produces.

• Layer height: 0.08mm
• Initial layer height: 0.16mm
• 100% infill
  
• Plate 4:
  - Start with Black
  - At layer #6 (0.56mm) swap to Dark Blue
  - At layer #16 (1.36mm) swap to Pastel Blue
  - At layer #21 (1.76mm) swap to White for the rest.
  
• Plate 5:
  - Start with Black
  - At layer #5 (0.48mm) swap to Dark Blue
  - At layer #9 (0.80mm) swap to Blue
  - At layer #11 (0.96mm) swap to Pastel Blue
  - At layer #15 (1.28mm) swap to Natural
  - At layer #21 (1.76mm) swap to White for the rest.

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller Patreon subscription.