Guitar / Notes on the fretboard

As a guitarist, aren't you also annoyed by all these notes that are constantly flying around, crumpling or can no longer be found?

Where is my chord chart, has the dog chewed up my fretboard notation overview again and why is there such a coffee stain on my pentatonic overview again...

That's over now!

Here you can find overviews in a slightly less devastating format:

• The simplest chords as tablature (2 different files)

• Fingerboard note overview (for a simple overview or for transposing)

-The common A minor pentatonic scale

The overviews are simply printed flat on the printing board.

The size can of course be scaled in advance as required.

ATTENTION, the following settings must be observed in the slicer:

Infilll: 100%

Height of the first layer: 0.16mm

Layer height: 0.08mm

Filament changes must be set in the slicer as follows:

Fingerboard note overview

Start with white filament

Switch to black filament at layer 4

Switch back to white filament at layer 11

A minor pentatonic

Start with white filament

Switch to black filament at layer 4

At layer 12, switch to the desired filament (gold in my case)

Switch to white filament at layer 16

Guitar chord overview small

Start with white filament

Switch to black filament at layer 5

Switch back to white filament at layer 12

Guitar chord overview large

Start with black filament

Switch to white filament at layer 19

The colors are of course individually interchangeable. But with the settings mentioned here, you can achieve the result as shown in the pictures.