原版见：https://makerworld.com/en/models/137254

华为手表的磁吸充电器比 Apple Watch 的大，因此我放大了原始模型，使它刚好能卡入华为的充电器。并扩大了连接处的宽度，让线头能卡进去。

我只在 HUAWEI WATCH GT4 上做了测试，理论上应该也支持 Ultimate、3、GT3、3 PRO、GT Runner、4、4 PRO……同系列的无线充电器（没有触点的款式），但你最好自行打印测试。

【注意】我手动设置了需要支撑的区域，若对你来说不合适，请自行调整支撑。

【2024/4/1 更新】我添加了 V2 模型，缩小整体体积以节省桌面空间，但留给充电器的孔位还是一样大。如果你是第一次打印，推荐直接使用 V2 ！

------------------------------------------------

Origin: https://makerworld.com/en/models/137254

The magnetic charger for Huawei watch is larger than that of the Apple Watch, so I have scaled up the original model to perfectly fit Huawei's charger. Additionally, I have widened the connector area to allow the cable head to fit in.

I have only tested this with the HUAWEI WATCH GT4. In theory, it should also support wireless chargers from the same series such as Ultimate, 3, GT3, 3 PRO, GT Runner, 4, 4 PRO, etc., but I recommend printing a test piece yourself.

【Notice】I set the manual support for the main part. If this does not suit your needs, please adjust the supports accordingly.

【2024/4/1 Update】 I uploaded the V2 model to reduce the overall size to save desktop space. The hole for the charger is still the same size.