Really cute set of fully functional coasters and holder for the Easter holiday! The holder and individual coasters are each on their own plate so that you can customize the colors to your personal liking. This is a very easy print. With an AMS, each coaster takes less than 1.5 hours to print even when utilizing all 4 colors! The holder for the coasters prints WITHOUT support in less than three hours.

If you like my designs, feel free to buy me a coffee! paypal.me/cbaileyhp

On the bottom of the coaster, I added some debossed holes to add 10mm - 12mm cabinet bumpers to prevent the coasters from sliding. The diameter of the holes are 13mm and they are cut -3mm to hold readily available, standard-sized cabinet bumpers. I used 3M cabinet bumpers that measures 12mm diameter x 4mm height. They fit perfect, leaving 1mm out to drip the surface.

The coaster also have a “drip ring” around them. This is to prevent condensation from cold drinks from running off of the coaster and getting on the surface you are trying to protect.

There are four designs available. Print one or all four for your personalized set. I used rosewood “wood” PLA for the holder and the body of the coasters. PLA or PLA+ was used for all of the colors.