Barista Express Hopper lid Remixed by Ole-Martin

Remixed by

Ole-Martin

Household>Other House Models

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.28mm layer, 3 walls, 10% infill

Designer

1.4 h

1 plate

5.0(2)

Boost

Released

Description

A lid for the Breville Barista Express hopper, if you don't use it and don't want an open hole in the top of your machine.

Comment & Rating (6)

@Bekkenes

Print Profile

0.28mm layer, 3 walls, 10% infill

my best day to day use print so far. easy to use, locking bolts perfect fit. Just a brilliant design that every breville/sage user should get and use. get a proper grinder and you are all set. thank you for uploading this for free

The designer has replied

@omBratteng

Glad someone else had a use case for this.

(Edited)

@Bekkenes

Replying to @omBratteng :

it's great. If I had one suggestion it might be to close off the hole to the grinder or make it some sort of mesh filter insert. maybe someone move it around and knocks something inside it or move it so one of the two clips falls out. the chance personally I think is like 1%, but it's technically possible :)

@omBratteng

Replying to @Bekkenes :

Good suggestions, I'll see what I can do :) Could maybe add some magnets in the lid too, so it's more stable.

(Edited)

@kylekennedykk

The cupboards in my kitchen are so low which results in me pulling my machine out toward me every time I want to make a coffee. This has helped but I noticed that some of the beans can get caught and dont make it to the grinders. So I made a little funnel that sits inside to help get the beans to the grinder. You can find my addon here https://makerworld.com/en/models/443310#profileId-349408 Thank for your design, it got me most of the way to where I wanted to be after years of putting up with the issue I had!