Mario, the iconic plumber, leaps beyond the bounds of his 8-bit origins to become a symbol of adventure and perseverance. Dressed in his signature red hat and blue overalls, he embarks on daring quests through mushroom kingdoms and fiery castles to rescue Princess Peach from the clutches of the malevolent Bowser. His journey is a testament to bravery, pushing through adversity with a jump and a power-up. 

 

Mario's adventures, spanning decades and evolving with each generation, inspire us to face our challenges with courage and to remember that sometimes, a leap of faith is all it takes to discover our own strength.

For other designs in the collection, visit Endless Collection

This model is very thin, please take care when removing it from the bed. Maybe wait until cold.

This is a challenging model to print, so maaaany thin lines, but the result is 🥰. 
Instead of enabling “Print Thin Walls” you can also try with “Arachne Perimeter Generator” https://help.prusa3d.com/article/arachne-perimeter-generator_352769

Printing it bigger could help also :P

If you need to scale the model to fit your print bed, just be sure to scale in XY and keep Z as 100%. It needed 2mm height to fit collection stands.

Designed to be used with the collection universal stand:

https://makerworld.com/en/models/379586

You can see my other designs here 😉 → https://makerworld.com/@jtorregrosa