The word Majesty evokes a sense of grandeur and awe, qualities that are intimately connected with the image of the eagle. Throughout history and across various cultures, eagles have been revered as symbols of freedom, power, and divine authority, aspects that align closely with the essence of majesty. The majestic flight of an eagle, soaring effortlessly through the sky, embodies the freedom and supremacy that the term "majesty" conveys. These birds, with their powerful wingspan, keen eyesight, and solitary nature, encapsulate the dignity and nobility often associated with royal figures, to whom the term "Your Majesty" is exclusively addressed.
Eagles are not just birds; they are icons of majesty in the natural world. Their presence in the sky commands attention and respect, much like a sovereign ruler in their court. The eagle's ability to ascend to the greatest heights, surveying its domain with unmatched clarity, mirrors the lofty ideals of wisdom, vision, and leadership that are inherent to the concept of majesty. Moreover, the eagle's role in heraldry and emblems, especially as an emblem of national identity, underscores its association with the majestic qualities of strength, courage, and resilience.
For other designs in the collection, visit Endless Collection
This model is very thin, please take care when removing it from the bed. Maybe wait until cold.
This is a challenging model to print, so maaaany thin lines, but the result is 🥰.
Instead of enabling “Print Thin Walls” you can also try with “Arachne Perimeter Generator” https://help.prusa3d.com/article/arachne-perimeter-generator_352769
Printing it bigger could help also :P
Nozzle Size | 0.4mm |
Layer Height | 0.2mm |
Infill Density | 20% |
Infill Pattern | Cubic |
Print Thin Walls | Enabled |
Wall Line Count | 3 or more |
Wall Orientation | Outside To Inside |
Supports | NO |
Material | PLA |
Print Orientation | STL orientation |
If you need to scale the model to fit your print bed, just be sure to scale in XY and keep Z as 100%. It needed 2mm height to fit collection stands.
Designed to be used with the collection universal stand:
https://makerworld.com/en/models/379586
You can see my other designs here 😉 → https://makerworld.com/@jtorregrosa