Serenity envelops her like a gentle shroud, as she stands before the flower, a testament to the quiet power that resides in moments of simple beauty. It is a scene of profound tranquility, where the soft murmur of the wind and the distant song of birds are the only accompaniments to her silent contemplation. This woman, in her quietude, embodies the essence of serenity itself, her gaze fixed upon the flower with an intensity that belies the calmness of her stance.
The flower, oblivious to the complexities of human emotion, nonetheless becomes a mirror to her soul, reflecting back a sense of peace that is as rare as it is fleeting. In its delicate form, she sees the embodiment of serenity—a serenity that is not just the absence of turmoil, but the presence of harmony, an equilibrium between being and nature, self and the world.
For other designs in the collection, visit Endless Collection
This model is very thin, please take care when removing it from the bed. Maybe wait until cold.
This is a challenging model to print, so maaaany thin lines, but the result is 🥰.
Instead of enabling “Print Thin Walls” you can also try with “Arachne Perimeter Generator” https://help.prusa3d.com/article/arachne-perimeter-generator_352769
Printing it bigger could help also :P
Nozzle Size | 0.4mm |
Layer Height | 0.2mm |
Infill Density | 20% |
Infill Pattern | Cubic |
Print Thin Walls | Enabled |
Wall Line Count | 3 or more |
Wall Orientation | Outside To Inside |
Supports | NO |
Material | PLA |
Print Orientation | STL orientation |
If you need to scale the model to fit your print bed, just be sure to scale in XY and keep Z as 100%. It needed 2mm height to fit collection stands.
Designed to be used with the collection universal stand:
https://makerworld.com/en/models/379586
You can see my other designs here 😉 → https://makerworld.com/@jtorregrosa