Shamrock pin I made just a few hours too late for St. Patrick's Day. I wanted something to wear or hand out. This model was simple and was done with supplies I had laying around. Prints three colors in 48mins or two colors in 35 minutes.

The model includes both one for a pin or one for a magnet, but the hole can be changed to suite your needs or deleted altogether. The magnet model doubles as a fridge magnet.

What you will need to match my settings:

20mm x 2mm magnets - https://a.co/d/8zGgREN

Or

10mm x 8mm Pins - https://a.co/d/4DtcJlw

I used double stick (https://a.co/d/56kayQE) for an instantly finished product, but you can use any glue of your choice.

Filament featured is Polymaker Green to yellow, temperature changing filament for lettering, isanimate green/yellow gradiant, and BL matte black.