Summary

I made this USB hub support to compliment the

Playstation 4 Horizontal Feet
by AlwaysComputing

https://www.thingiverse.com/thing:2847995

I printed 2 of the Playstation 4 Horizontal Feet to place towards the back corners of the console. Then printed the USB hub support for the front. It Holds the USB hub solid and extends under the console as well.

Here is the PS4 USB hub that I am basing the design on:
https://www.amazon.com/dp/B07Q9J7LLP?psc=1&linkCode=sl1&tag=wolfeedition-20&linkId=2f5e11ac96c9b604792853c91c4616bf&language=en_US&ref_=as_li_ss_tl

I uploaded a bunch of variations. Choose whichever you want.

Options to choose from:
Wire management tunnel(s) or solid support. PS4 logo on the front
Wire management tunnel(s) or solid support. Plain front

Wire management tunnel that is centered with the USB port.
1 Wire, 2 Wire, 3 Wire, 4 Wire, 5 Wire

Print Settings

Printer Brand:

Creality

                                            Printer:                      
Ender 3 Pro

Rafts:

                                            Supports:                      
Yes

Resolution:

                                            Infill:                      
20

Filament:

Overture PLA Plus (PLA+)

                Digital Blue                    
                        Notes:                     https://www.amazon.com/dp/B07VCPK9KC?psc=1&linkCode=sl1&tag=wolfeedition-20&linkId=e83700eae3f0b5d557ea8c41992d61bd&language=en_US&ref_=as_li_ss_tl

Printed at 225°

Print with supports. Make sure the density is 20 or less.

May need to test for your setup.

Supports come out clean and easy.