A Formula 1 tyre compound themed coaster set for the F1 fans out there. Includes a wheel-themed holder/stand to store the coasters in a unique way when not in use.

Design Variations:

There are two designs and two versions of those designs, one is intended for use with an AMS to achieve the multi-coloured design and the other can be printed without an AMS i.e. on any 3D printer, by pausing the print on certain layers and manually swapping out the filament. Alternatively, this version can be printed in one colour and painted if that's what you like to do!

Printing / Slicing Instructions:

The simplest way to print these is to download the included print profiles for either the AMS or non AMS versions of the file and change the colours/ filaments as you please. However, if you want to use the raw STLS, see below. Note that these are intended to be printed at 0.2mm layer height.

AMS Version:

1. Load all of the parts into Bambu Studio or your slicer of choice
2. When/If prompted to scale the parts to millimetres, CLICK NO FOR ALL PARTS.
3. Load the files as a single object with multiple parts.
4. Add the filaments as required.
5. In the object menu, assign the main body to black, the spokes to grey and everything else to either, red, yellow, white, blue or green depending on the tyre and compound that is being printed.

NON-AMS Version:

1. Load files into Bambu Studio or slicer of your choice.
2. Slice the files and create a colour change at the layers where the colour changes occur.
3. Your print should pause allowing you to swap filaments.