Submarine toy for bathtub

Hi, I have designed bathtub accessories that will be used mainly by children. I believe these submarines will be their favorite toy.
Both submersibles have periscopes that can rotate and the smaller submersible has rotating propellers.

Both submarines can be printed with and without AMS.

Pencil submarine has 2 variations of the Tip part. Choose Normal (pointed) or rounded

If you continue reading you will get detailed instructions for building.

Building a Pencil submarine

1) First prepare all the cleaned parts and glue.

2) First glue the Body of the submarine. Follow the order as in the picture. (The tip part has 2 versions, it's up to you which one you use)

3) Next, glue the windows as pictured.

4) The next step is to assemble the bridge. First you need to insert the periscope into one half of the bridge. Apply glue to one half of the bridge (Caution! The glue must not get to the periscope part). Glue the two halves of the bridge together and finally glue the antenna.

5) Just glue the Bridge to the Body (Periscope forward) and the submarine is ready.

Building a Submarine toy

1) First prepare all the cleaned parts and glue.

1.1) If you don't have AMS or want to paint the submarine yourself, you need to paint the submarine (can be done at the end)

2) The next step is to assemble the bridge. First you need to insert the periscope into one half of the bridge. Apply glue to one half of the bridge (Caution! The glue must not get to the periscope part). Glue the two halves of the bridge together and finally glue the antenna.

3) As in the previous point, glue the body of the submarine together. Insert the propellers into one half, apply glue (not the propellers) and glue both halves together.

4) Finally glue the Bridge to the Body (Periscope forward)

5)The submarine is finished.

Have a nice fun time.