Compact, attractive holder/dispenser for your favorite K-cup pods. Holds 36 K-cup pods in a small footprint that looks attractive sitting on any countertop. Components are printed on separate print plates in order to print in whatever colors you choose to match your kitchen, breakroom or office space.

If you like my designs, feel free to buy me a coffee or help with filament costs! paypal.me/cbaileyhp

Printing & Finishing Tips

• Components can be printed in any color to match your decor.
• Check the print plate that you are using before starting the print job!
  • Printing the drawer knobs and side panels on the Textured PEI Plate gives a nice finished look (optional).
  • Printing the drawers on the Smooth PEI Plate / High Temp Plate will reduce noise when drawers are sliding open/close (recommended).
  • The back side of the frame will likely not be visible, so use your choice of print plates.
• Can be printed in any material, I used PLA Basic.
• Small, self-adhesive rubber bumpers (for cabinet doors) can be applied to the bottom to prevent the finished coffee pod holder from sliding when in use.
• Fillets were used to allow the side panels to “nest” on the main frame. Make sure you have them properly oriented before brushing a small amount of super glue to secure them on.
  • Side panels are for aesthetics only, so you can choose whether or not to use them.

Use rubber cabinet bumpers to prevent sliding

Drawers have drawer stops to prevent sliding all the way out, simply angle them to insert them into the frame

Holes have been added to the back of the frame to allow air to release when closing drawers

I hope you like my coffee pod holder! Happy printing!