This piece is 142x200mm and 1.7mm thick

I made a frame for the wall as well in the “Raw Model Files”

Do NOT adjust the size in your slicer!! The layers will not come out right.

Do not change the size, this will cause errors in color change compromising the entire print.
Use my print profile or you will not get the desired results.
It can be printed safely without AMS and on any printer.

To get the same outcome as the print I have shown. You need to use the same filaments that I have listed. Each filament has different "density" or transmission distance that allows light to shine through to the filament underneath the top. So if you use a different brand or type, it might not have the same effect as if you did it with the exact same color and filament. Nonetheless give it a shot and leave a picture of your print if you wish to run it anyway. Id love to see the outcome from different brands and types to see how it turns out as well!

Please leave me a thumbs up if you love the print!!