Universal (2xangle)phone holder Shower Glass by Tommy Gun

Tommy Gun

Household>Other House Models

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 25% infill

Designer

2.6 h

1 plate

4.5(13)

Boost

132

127

Released

Description

Requested by my wife, had to act on it so it matches the amazing contest !!!!! enjoy, this beauty !! really is somehting we use a ton since made and gotta say im impressed by its sturdyness and functionality

-1 angle choice, leveled and 40degree standing down, to be raised up :D

-support is a little tuff to remove on the bottom where the screw comes in, but be carefull and dig it up !! specially in petg it tends to fuse up a little, no need for any drilling.

Enjoy !!

Interested in selling my prints : https://patreon.com/Papa3dHomemadePrints

shower glass phone holder

angled phone holder

angled shower glass phone holder

shower

holder

cell holder

Comment & Rating (34)

@Gasguirre

Print Profile

0.2mm layer, 3 walls, 25% infill

The print was great. just need to fix the small hole missing. other than that perfect. fits a samsung s24 ultra. a bit tight but does work

The designer has replied

@TommyGunOG

the hole is there just filled in support, had forgot to remove support from settings, printed a hundred of em hole is there, tha ks for the rating

(Edited)

@Gasguirre

Replying to @TommyGunOG :

yes, I knew something was a bit off since the filling wasn't a complete piece. thank you for the build :) I enjoy putting my phone on the shower now! :)

(Edited)

@TommyGunOG

Replying to @Gasguirre :

my pleasure

(Edited)

@voltronwanted

Print Profile

0.2mm layer, 3 walls, 25% infill

nice!

The designer has replied

@TommyGunOG

thanks for the pic and rating

@CCPAZ

Print Profile

0.2mm layer, 3 walls, 25% infill

bien mais obligé de faire le trou pour le passage de la vis de serrage. impression ABS bambu

(Edited)

The designer has replied

@TommyGunOG

le trou y est, simplement disabler le support.....pas besoin de drill, j'en ai priduit une vingtaine, croyer moi le trou y est

@user_9695224

Great idea, printed properly. Still unfortunate though: 2 hours of printing and there's no hole for the screw. Solid base until layer 10-ish or so. Will try to drill tomorrow.

The designer has replied

@TommyGunOG

yeah the hole is there, printed hundreds of them, simply disable support, its buried in it, you'll see it if you drill it its not the same infill and regular wall......jsut use pincer, thats what i did

@rwsteed

I printed this and the larger piece is solid on the bottom where there should be a hole to thread the screw. was this intended? I will look into drilling it out or reprinting a modified version. Great idea though.

The designer has replied

@TommyGunOG

its support yeah, i took my pincer to remove it :D was in petg, was tuff !!! some adn still on that peice lol

@user_3557864717

to the 12th layer? that's what cura is wanting to do with it. looks like a 1/4 drill bit will clear it out. :)

@thestylishdrago

I’ve been wanting something like this! So glad you made it!

The designer has replied

@TommyGunOG

ty sir appreciate your review and comment !!! :D

@MattysWorld

Awesome File cant wait to get it printed today

The designer has replied

@TommyGunOG

tx for the review and rating appreciated

@Gilded

Print Profile

0.2mm layer, 3 walls, 25% infill

printed perfectly, doesn’t fit my shower though

The designer has replied

@TommyGunOG

thanks for the review and rating !!! what size is your shower glass ? i can adjust it for ya mate

@MattBaldwin

I printed this great idea but I wouldn't say I liked it. The hole for the screw to go in is missing, This needs to be manually drilled after printing. Surely this could have been created in CAD. The screw piece is way too short. It cannot hold any larger phone ie a Samsung S21 or S24.

The designer has replied

@TommyGunOG

looks like you scalled it down, and the hole is there simply filled with support, no need to "drill" simply use your pincer to clear the support.....thanks for the review good luck in your endeavor

@davidjohnston65

Print Profile

0.2mm layer, 3 walls, 25% infill

definitely need to open the hole on the main part makes the screw not go in. I used a drill and ran a screw through it. it worked.

(Edited)

Other Issues

The designer has replied

@TommyGunOG

thanks for the rating !!! aprpeciated mate

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Universal car phone holder

Le RmX en 3D

147

194

Print Profile(1)

Description

Comment & Rating (34)

License

Related Models

Universal car phone holder

Phone Holder "Tire"

Phone Stand | AI-Designed

universal tesla phone/tablet holder