Screwdriver Bit Grip - 1/4" / 6.35mm / 4mm Shanks
Copyright Claim
Screwdriver Bit Grip - 1/4" / 6.35mm / 4mm Shanks
Boost
4
8
4
Print Profile(2)
1/4" Shank (6.35mm), PLA, 0.2mm layer, 6 walls, 30% infill
Designer
52 min
1 plate
4mm Shank, PLA, 0.2mm layer, 6 walls, 30% infill
Designer
52 min
1 plate
Boost
4
8
4
0
22
11
Released
Description
This is a simple grip for 1/4" (6.35mm) and 4mm shank screwdriver bits.
There is a provided PLA print profile for each size.
Print Settings
- PLA recommended
- 0.4mm nozzle
- 0.2mm layer height
- 6 perimeters
- 30% infill
- Order of walls: outer/inner
I've printed more than 10 of these to test the tolerance.
If the fit is not absolutely perfect, please try scaling by 1-2% in the slicer.
Comment & Rating (4)
All
Print Profile
4mm Shank, PLA, 0.2mm layer, 6 walls, 30% infill
Very useful and handy tools great addition to my electric screwdriver
1
Reply
Print Profile
1/4" Shank (6.35mm), PLA, 0.2mm layer, 6 walls, 30% infill
0
Reply
Print Profile
4mm Shank, PLA, 0.2mm layer, 6 walls, 30% infill
0
Reply
Print Profile
1/4" Shank (6.35mm), PLA, 0.2mm layer, 6 walls, 30% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld