Hueforge Loewe-Lion from photographed Image
Hueforge Loewe-Lion from photographed Image
Print Profile(1)
Description
Hier habe ich für euch ein Hueforge Bild mit einem Löwe drauf.Die Giraffe ist in meinem Profil.
Den Löwen hier habe ich 2018 fotografiert den anderen in meinem Profil 2017
Zur Zeit noch in 150x150 millimeter.Wer es größer möchte, kann mir gerne schreiben.
Ich bin immer wieder überrascht wie maßhaltig mein Drucker druckt, obwohl ich ein leicht krummes Druck Bett habe.
Daher gebt mir einen Daumen hoch, wenn euch das Bild gefällt.
Inkl. meinem besten PETG Profil
und gedruckt mit PETG falls es in der Sonne hängt oder das Bild auch mal raus darf.
Die STL liegt auch bei.
Bitte beachten:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Höhe der ersten Schicht.
Filaments Used:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #11 (0.96mm) swap to Gray
At layer #17 (1.44mm) swap to White for the rest.
-------------------------------------------------------------------------------------------------------------------------
Here I have a Hueforge picture with a Lion on it for you.
I photographed the lion here in 2018 and the other one in my profile in 2017
Currently still in 150x150 millimeters.If you would like it bigger, please write to me.
I'm always surprised at how true to size my printer prints, even though I have a slightly crooked print bed. So give me a thumbs up if you like the picture.
With my best PETG profile
and printed with PETG if it is hanging in the sun or the picture came come out.
The STL is also included.
Please note:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm height of the first layer.
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #11 (0.96mm) swap to Gray
At layer #17 (1.44mm) swap to White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
