This is my remix for RatRig Panel Due i7 adaptor using friction to stay in desired place.

Recomended plastic: PETG/ABS/ASA.

Required hardware:

1. For mounting the screen bezel to the case and the Pane Due to the bezel.8x M3x8mm

Flat Head Thread-forming Screws

1. These are for assembling the swivel arm mount. Tighten the M5 screw until there is enough tension to hold the assembly together, but loose enough that it can rotated.

1x M5x20mm Flanged Socket-head Screw
1x 9.5x7.5mm O.D. Spring
1x M5 Nyloc Nut

1. For attaching the pivot arm to the Case

4x M4x8mm Flat Head Screws
4x M4 Nyloc Nuts