P1S Hotend Cable Guide | Quick Hotend Swap
Copyright Claim
P1S Hotend Cable Guide | Quick Hotend Swap
Boost
19
46
9
Print Profile(2)
0.16mm layer, 3 walls, 15% infill
Designer
15 min
1 plate
0.16mm layer, 3 walls, 15% infill
Designer
11 min
1 plate
Boost
19
46
9
2
58
26
Released
Description
I designed this part to make swapping hotends on my P1S faster, easier and especially more reliable.
Particulary in poor lighting conditions this cable guide makes it much easier to connect the wires of the hotend to the toolhead.
To install the part, simply remove the front cover of the toolhead and unplug the cables. The guide can then be slid over the connectors.
Note: The printer should be turned off when swapping hotends.
Comment & Rating (9)
All
Boosted
Print Profile
0.16mm layer, 3 walls, 15% infill
Thank you for making this!! It was our number one annoyance when changing nozzles so this is a must have item. Printed it in PETG and it fit perfectly. You are my hero for this👍
The designer has replied
1
Reply
Thanks for the kind words, appreciate it 🙏
(Edited)1
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
Thank you for this!!! I always had trouble reconnecting the hotend and parts cooling fan plugs.
I printed in ABS.
The designer has replied
1
Reply
You're welcome. Happy you like it :)
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld