Soviet self-propelled combine harvester Niva SK-5

The model is made in 16 scale, the details are divided so that there are no problems with printing (with the size of the printing platform). A text document is attached with the files explaining some of the assembly points, the dimensions of the metal shafts are also indicated and all drive pulleys are numbered. I tried to make it as close to the original as possible.
- self-propelled, radio-controlled model
- pistons are running in the engine (which creates sound. The pulleys and the fan on the engine are also movable.
- the keys of the straw man are moving from behind
- the side pulleys of the drives are moving - the conveyor of the inclined chamber is moving
- the reaper is fully movable (reel, auger, scythe)
-there is a mechanism for lifting the reaper
-the piggy bank will open

Set:
-combine harvester Niva SK-5
-tilted camera
-harvester
-a smoker
-shredder
-tools (wrenches, hammer and drawer)

To build it, you will need:

-choose the radio control equipment at your discretion (which one is convenient for whom)
- 3 arduino gear motors
- 2 servos SG 90
-25 BEARINGS MR105 (5x10x4)
- rubber straps for 1x1mm tape recorder
-aluminum wire with a diameter of 2mm
----copper wire with a diameter of 0.5mm
-metal shaft with a diameter of 3mm
-metal shaft with a diameter of 5mm
-paper clips
-1mm thick sheet of tin
-WPL gimbal

0.1 mm layer, 100% filling. It will take about 2 kg of plastic
for the TPU 0.1mm layer, filling 20%