What if…? Mass Effect is set in a dystopian past, or even more dystopian future. Introducing Steampunk Commander Shepard, also known as FemShep.

Measures 120mm x 120mm.

The included 3MF file will have the colour swaps already set up. Alternatively, use the STL and set up your own filament swaps and settings as per the instructions below.

If you need to resize this print, change only X and Y dimensions. Altering the Z height will mess up the layer colour swaps.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Grey Transmission Distance: 2
PLA BambuLab Basic Gray Transmission Distance: 0.8
PLA BambuLab Basic Jade White Transmission Distance: 3
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 3

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Grey
At layer #9 (0.8mm) swap to Gray
At layer #11 (0.96mm) swap to Jade White
At layer #16 (1.36mm) swap to Dark Red
At layer #19 (1.6mm) swap to Jade White for the rest.

Source image generated with AI ∙ February 2024