Nike Air Jordan Lightbox
Copyright Claim
Nike Air Jordan Lightbox
Boost
59
58
14
Print Profile(3)
0.22mm layer, 2 walls, 2% infill
Designer
1.7 h
1 plate
0.2mm layer, 2 walls, 8% infill
Designer
2.7 h
1 plate
0.2mm layer, 2 walls, 8% infill
2.4 h
1 plate
Boost
59
58
14
2
93
56
Released
Description
My print profiles are dialed in for both and face. 20mm hole is added for a 20mm wire grommet that can be found on amazon. You can remove this negative object and add your own though.
Iv been advised by makerworld to add a little snip it here. The model looks similar to another model on maker world but the art work is the only thing that is the same. And even that’s not the same as Iv changed out the fonts and created my own style box etc with a dif structure and build.
Comment & Rating (14)
All
Print Profile
0.22mm layer, 2 walls, 2% infill
Perfect print! Printed very fast and very clean. Settings are perfect.
Printed on a Wham Bam PEX Flex Bed. AUX fan set to 50.
The designer has replied
1
Reply
Thank you so much for the review really appreciate it!
0
Reply
Boosted
Print Profile
0.22mm layer, 2 walls, 2% infill
came out amazing
The designer has replied
0
Reply
Thank you for the rate glad your happy with it! Make sure to check back I just dropped another one and will be dropping and one later today!
0
Reply
Print Profile
0.22mm layer, 2 walls, 2% infill
0
Reply
Hello my friends there is only one printing plate there is no back plate
The designer has replied
0
Reply
Sorry will add in a few mins
0
Reply
Box is up
0
Reply
Print Profile
0.22mm layer, 2 walls, 2% infill
einfach Codes Design
1
Reply
noob here do you need transparent filament or will this work with regular PLA?
0
Reply
Print Profile
0.22mm layer, 2 walls, 2% infill
1
Reply
Print Profile
0.22mm layer, 2 walls, 2% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld