Cute articulated bunny inspired by thumper. Complete with twitterpated flowers and a tapping foot. Assembly instructions below!

Print at 0.16 layer height with no supports or brim.

Created two versions - one set up for printing with an AMS, and one with snap in color pieces. Don't want to leave anyone out on the fun of multicolored prints! There are signifigant time savings printing the snap together version.

There is also a Small Version if you don't want to print the full size.

ASSEMBLY

Print Profiles have been provided with Seam and Color Painting done, but the OnePiece version is modeled for easy painting.

For Snap together Version

Print the NOAMS files, the crown and as many diff color flowers as you like!

For use with an AMS - OR to print as one solid color

Print the OnePiece versions of the head and body, the crown and flowers.

Tolerances can change based on fialment and printer, so if something is loose, add some glue!

Optimized for 0.16 Print resolution - No Supports or Brim

Pop in the head inserts.

Add the eye inserts.

The crown clips onto the ears, then slide down slightly. (Takes a little force.)

Add some flowers of your choice!

Glue on the belly. (Glue stick or Super glue works.)

Put on the head and done!

Happy Printing! Leave a comment with any questions or suggestions! I am open to revising the models.

Robot Cupcake Designs