Hello!
Feel free to share your prints :)
Instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Ivory White Transmission Distance: 5.7
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Matte Ivory White Transmission Distance: 5.7
Swap Instructions:
Start with Charcoal
At layer #4 (0.4mm) swap to Ivory White
At layer #13 (1.12mm) swap to Charcoal
At layer #15 (1.28mm) swap to Dark Red
At layer #18 (1.52mm) swap to Ivory White for the rest.