Top glass riser BambuLab Emboss *V2* [P1S and X1C]
Copyright Claim
Top glass riser BambuLab Emboss *V2* [P1S and X1C]
Boost
140
252
80
Print Profile(4)
0.16mm layer, 2 walls, 15% infill
Designer
34 min
1 plate
Basic PLA Print - 0.2mm layer, 2 walls, 15% infill
23 min
1 plate
PETG - For Medium Heat Resistance
43 min
1 plate
ASA/ABS - For maximum heat resistance
23 min
1 plate
Boost
140
252
80
3
615
394
Released
Description
Find V3 here: https://makerworld.com/en/models/423637#profileId-326893
Version 2 of my top glass riser. I added a bambulab emboss for aesthetic reasons.
Cleanest and most simple top glass riser out there (in my opinion). No support necessary, 15% Infill, quick and easy print.
For the P1S, likely also works on the X1C.
Comment & Rating (80)
All
Print Profile
Basic PLA Print - 0.2mm layer, 2 walls, 15% infill
Without support it's not perfect
The designer has replied
1
Reply
supports? mine comes out great without them!
0
Reply
Replying to @Roket_1
as you can see in the upper part without the aid of supports the piece is slightly damaged
0
Reply
Replying to @Roket_1
as you can see in the upper part without the aid of supports the piece is slightly damaged
0
Reply
perfect
1
Reply
Came out perfectly in some old translucent red PETG i had lying around. Hopefully this helps to ventilate and reduce the amount of clogs I keep getting recently!
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
perfetto
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
very nice and useful print
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
nice print, useful piece
(Edited)
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
works great
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Perfect. Printed great and does a good job. Thanks
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Nice clean print!
(Edited)
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
I don't have an official P1S so your neat cutout for the top glass handle doesn't fit. But it still does the job just fine. Thanks
0
Reply
License
This work is licensed under a
Creative Commons Attribution
Related Models
© 2024 MakerWorld