This is a quick remix of the original "LoD (Look of Disapproval)" which I posted a long time ago (on Thingiverse). This one is split for easier printing, and has a key which should help keep it together without glue (but glue is optional).

This should not need supports, but the parts are not oriented for printing. It was designed to have a layer change to black or a contrasting color for the text parts, where that is put in will depend on the resolution used.

I printed this, but had a layer shift so I turned it into a fridge magnet (pictured). Changing it into a magnet required me to drill a hole in the back where a 8x3mm magnet was glued. It was also scaled down for the print shown in the pic.

Since the magnet turned out so well, I added a magnet version "LOD-6D-Magnet2.stl", which uses two 8x3mm cylinder magnets. This version is scaled to 75% as well.

(imported from Printables)

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here or on Printables, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!