ACTIVATED CARBON FILTER WITH 4 AND 6IN AIR HOSE CONNECTORS - EXT DIA 200 X HEIGHT 293

ACTIVATED CARBON FILTER - EXT DIA 200 X HEIGHT 293

Free Upgrade 09 April 2024 - Filter Body in one piece!

Minimum Build Print Volume required: 254X254X254 for the version in two pieces and for the "Unit in one piece" a printer with a minimum base 254X254 and a Z minimum 300mm!

IF YOU DO NOT WANT TO SPEND THE TIME PRINTING THIS PROJECT... YOU HAVE THE OPTION TO BUY IT AS A COMPLETE 3D PRINTED KIT !
LET US KNOW, AND WE WILL PRINT IT FOR YOU! (2 EURO / PRINTING HOUR (BAMBU X1C/CREALITY K1 MAX) AND 0.03 EURO/GR - 3O EURO/KG OF FILAMENT - ABS, ASA OR PETG (AS PER YOUR REQUEST)
IF REQUESTED, WE CAN FILL UP THE FILTER WITH ACTIVATED CARBON! WE CAN ADD ALSO A PACK WITH THE REQUIRED CARBON FOR THE NEXT REFILL - 60 EURO/1KG; 40 EURO/500GR; 25 EURO/250GR

Can be used as a replacement for all Xiaomi Air Filter Units - what use a 200 X 293 mm filter or for those who use Growing Tents ... and need to filtrate the exhausted air!

It can be connected to a 4 or 6IN Air Hose using the provided connections.

It can be pair with our Air Filter Unit...

https://cults3d.com/en/3d-model/home/air-purifier-200x293-and-210x293-filters

Filter can be extended as much is required ... since the 2nd Section of the filter can connect to a copy of itself ... or to the End Cover.

In order to print without support, the 2nd Section have a 0.2 build in wall - what need to be removed after printing!

A Felt Textile (Felt Paper) 1st Stage Filter can be add to the system, positioned outside of the Carbon Media Holder, and secured on position with some elastic strips or use the Filter Clamp provided. Clamp use a M6 20-25mm Bolt.

This KIT is for personal use only! Please read our policy! If you do not agree, please do not buy this product! Failure to comply with our policy will result in the immediate termination of your user license! Do not alter or modify to resale, share with others, make it public or redistribute in any form, digital or in physical form, all digital content as images, dxf, stl files, etc. Do not sell, share, makes it public or redistribute as it is in current form. Do not sale the final product! You will need a Commercial License in order to sell this final Product! For a commercial license please contact us!

Thank you for your interest in our product!

Stay safe, be safe and be happy!

DESIGN TO PRINT WITHOUT SUPPORT! BY COSTA!

254X254X254MM MINIM PRINT VOLUME!

DESIGN TO PRINT WITHOUT SUPPORT!

Parts where printed in ABS and also in PETG filaments! Great print, I am amazed how great the Carbon Filter was printed!
Samples from photos - Housing in PETG (white); Cover -ABS (black).

Be aware, those are VERY LARGE files!

Filament consumption is not very big... entire unit can be printed with less than one kg of filament, however, printing time will exceed 1 Day for each section, and this is possible only if you are printing with a high end quality printer ... as Bambu X1C, or any other new high speed 3d printer!

Time table:

Bambu Studio Slicer for Unit in Sections and using Bambu X1C Printer!

Orca Slicer for Filter in One Unit and using Creality K1 Max Printer!

Both printers use 0.4mm Nozzle!

Section no 1 : 26 h 31 min. require: 382 gr. PETG X1C
Section no 2 : 30 h 4 min. require: 430 gr. PETG X1C
Filter One Unit : 51 h 43 min. require: 541 gr. ABS K1Max
Base Cover : 3 h 20 min. require: 114 gr. PETG X1C

All components are fitting well together ! Clean all print glitches before assembling!