I see there's a ton of phone/tablet stands here on Makerworld and I thought I'd try my hand at one. I still have all the pictures of the process of me designing it along along with a video I'll be uploading to Youtube at some point in the future once it's edited. This model can be printed without an AMS since it has a main body and two inserts for each side. I used a tiny hammer to make the inserts go in perfectly and I printed a couple of these with silk filament which I did change the speed settings for when I did it but I changed them back to normal settings. If you wish to print it in silk filament, be sure to turn the speeds back down to give you that shiny look.