My Sons (and daughter) are all huge Monster Jam fans. I made this to fit their bunkbed, and thought other people would appreciate it as well. Easy 4 color print, any Black, yellow, grey and white should work.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Matte Ash Gray Transmission Distance: 1.7
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Ash Gray
At layer #10 (0.88mm) swap to Lemon Yellow
At layer #21 (1.76mm) swap to Ivory White for the rest.