WFC Gamer Edition Barricade Upgrade Kit

This kit includes replacement hips and feet that improve articulation and posing, new hands and 2 rifles.

The foot pieces will need to be mirrored to create a left and right. Same with the hands.

This is a low to medium difficulty modification, depending on experience, available tools and confidence. It will also require painting.

Tools:
Pin punch
Pliers
1.5 mm steel rod
bolt cutter

All of these can be acquired on Amazon and are useful/can be used for any figure mod project.

The stock hips can be switched out for the new hips. Just remove from the ball joints and then pop the mushroom pegs from the legs.

The stock feet will need to be removed using the pin punch and pliers. Once removed, the new feet can be installed.

The new feet comprise 3 pieces. The ankle inserts must be inserted into the spaces at the bottom of the legs, left after removal of the stock feet. Correct orientation of the part is needed. A 1.5mm pin will be required to hold the new parts in place.
The other 2 foot sections can then be assembled using another piece of 1.5mm rod.
The assembly can then be inserted via the 5mm male port into the 5mm female port.

The hands are a simple switch out at the ball jointed wrists.
The new hands allow Barricade to hold a 5mm port weapon.

I have included an additional neutron blaster design that will print as a pair and give Barricade 2 guns that he can wield.

Note...Let me know if you have any tolerance issues and I will try to help.

FDM