Boston Terrier - Hueforge - 0.2mm Nozzle, 0.04mm layer height, 200x200mm

In my print profile I have assigned the model to have a variable layer print height, which means that the first 8 layers of the model will print with a 0.08 layer height, and switch to a 0.04 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display.

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.08mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Overture Space Gray Transmission Distance: 2.1
PLA Elegoo Bright White Transmission Distance: 7
PLA Overture Matte White Transmission Distance: 3.7
PLA Elegoo Bright White Transmission Distance: 7

Swap Instructions:
Start with Black
At layer #17 (0.72mm) swap to Space Gray
At layer #18 (0.76mm) swap to Bright White
At layer #27 (1.12mm) swap to White
At layer #40 (1.64mm) swap to Bright White for the rest.