Voronoi Q-Tips Dispenser (Bathroom organizer)
Copyright Claim
Voronoi Q-Tips Dispenser (Bathroom organizer)
Boost
122
213
10
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
2.4 h
1 plate
Boost
122
213
10
0
234
117
Released
Description
Introducing the Voronoi Q-Tips Dispenser: a functional and stylish addition to your bathroom accessories collection. Crafted with care, this PLA-printed dispenser combines form and function, making it a must-have for any bathroom countertop.
Key Features:
- Voronoi Pattern: The exterior of the dispenser features an intricate Voronoi pattern, adding a touch of elegance and sophistication. Whether you’re a design enthusiast or simply appreciate aesthetics, this dispenser stands out.
- Curved Interior: What sets this dispenser apart is its cleverly designed interior. The curved shape allows the cotton swabs to rise effortlessly as you pull one out. No more digging around or struggling to retrieve a swab!
Feel free to customize the colour of your dispenser to match your bathroom decor.
Print it, use it, and elevate your bathroom experience! 🌟🛁
Comment & Rating (10)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
It’s a shame because this is a very beautiful design, but it does not print. I tried two different times. Tried with the fans on and with the fans off adjusted the temperature adjusted the speed. The lines are just too thin to print properly.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
didn't print well, but possibly a good design
the grid infill wouldn't be my choice
I'd have used 3 walls instead of 2
I may realize this and try again but it's currently functional and beats the packaging my qtips came in
Other Issues:warped during printing
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I was not able to print this. Maybe I did something wrong, but some tips are welcome and I'll try again.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice print! Your Qtips look much neater than mine!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
no easy print
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
everything printed good some of the design on the lower part failed but doesn’t look bad
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Support Issue:Lines are very thin and hard to print, either smaller nozzle size or slower print speed adjustments might work
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Strength Issue:vordere Struktur zu dünn und schlecht druckbar. Trotz Support
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Missing Model Parts
Other Issues:the hex was too thin and snapped while printing
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld