Here is a simple organizer tray which holds a single box of tissues and a candle with its lid. The piece can be used with or without a lit candle and could be placed in the bathroom or on shelves/tables around the house. I was looking for an aesthetic way to organize two important items which are commonly found around the house.

This model is designed to fit “square” tissue boxes that are labeled 21.3 cm x 20.8 cm on bottom (72 2-ply tissues for me). Also, the candle is a White Barn/Bath and Body Works 14.5 oz / 411 g candle with a normal lid (textured lids may not fit in designed pocket). You will also need five self-adhesive ½" rubber bumpers (search 3m rubber bumpers online and there are plenty of options to order if none are local to you) and some sort of glue (I used super glue).

For many printers, this model is too large to print all at once. Therefore, I have added a split version which can be printed separately and then be glued together. I have also provided the whole version in case you have a large build volume.

I printed the model flat on the build plate out of Overture Rock PLA with a 0.4 mm nozzle and 0.2 mm layer height. There is no need to use supports on the rubber bumper feet cutout sections (these will bridge just fine).

Once these parts are done printing, use super glue to adhere both sides together (this will complete the recessed half circle underneath so that a rubber bumper can fit there). Stick five of the ½" rubber bumpers on bottom of piece and then use as desired!