MJX Hyper Go 3S LiPo battery mod MJX Hyper Go

Mod for using standard Li-Po batteries in MJX Hyper Go.

The clip modification allows the use of higher capacity standard batteries in MJX Hyper Go radio control cars without using straps or weird inventions.

The battery stopper ensures that even with shocks, no damage to the steering or servo is reached. It allows for smooth steering movement.

TPU construction compensates for possible variations between batteries and allows the balancer cable to be attached.

The clip is placed replacing the original one, only a small wire or pin is needed to make the hinge.

For maximum dimensions I am using a 2500mah battery like the one in the picture.

Mod to use standard Li-Po batteries in MJX Hyper Go.

The modification of the clip allows the use of standard batteries of higher capacity in the MJX Hyper Go radio control cars without the use of straps or weird inventions.

The battery stop ensures that even with shocks, the steering and servo are not damaged. It allows for smooth steering movement.

As it is made of TPU, it compensates for possible variations between batteries and allows the balance cable to be held.

The clip is placed replacing the original, only a small wire or pin is needed to make the hinge.

For maximum dimensions I'm using a 2500mah battery like the one in the picture.