DJI remote control RC-N1 RCN1 mount / support / adapter / holder / camera tripod / GoPro (for DJI Mini 2 Mini 3 Pro Mavic 3 Air 2 Air 2S drone)

• Solid mount to be clipped on a remote control DJI RC-N1.

• Set up and removed in one second.

• Hold firmly without moving.

• Allows to use the phone/tablet holder on top.

• USB-C port still accessible on bottom.

• Ventilation opening undisturbed.

• Does not allow to close completely the phone/tablet holder.

This mount can be set on:

• GoPro mounts

• Tripod & systems using camera screws (hole for a 1/4"-20 brass insert)

• Whatever system using M3 screws separated by 28 mm horizontally and 38.5 mm vertically

Required for GoPro mount:

• 2 x M3 brass inserts (6 mm long max.)

• 2 x M3 - 8 mm screws

• 1 x M5 (20 mm long min.) hexagonal head screw (or GoPro screw)

Required for camera/tripod mount:

• (1 x 1/4"-20 brass insert for tripod mount)

This mount is included in the following steadycam system for Mavic 3:

https://cults3d.com/en/3d-model/gadget/steadycam-system-for-drone-dji-mavic-3-classic-cine-pro-enterprise-rem

• For optimal resistance, print parts on the bed as shown on picture

• Only the main part requires support (for the hook)

Settings:

• 5 walls

• 4 layers bottom/top

• 25 % infill

The parts presented on pictures required 49 g of ASA and a 2h40 print using a Bambu Lab X1C. I used glue stick and brim. Any other material should fit, adapt the printing technic accordingly.

After printing, some holes may require rectifications, using drills:

• 4 mm for M3 brass inserts (on main part)

• 8 mm for 1/4"-20 brass insert (on main part)

• 3 mm for M3 screws holes (on GoPro mount plate)

• 5 mm for GoPro screw hole (on GoPro mount plate)