This is a Full-Size, wearable Krampus Mask. It is Inspired by the traditional Krampus, a (Fictional) Creature from the Bavarian/Austrian/Swiss Alps. The original Masks are handcarved out of big pieces of Wood. This one can be 3D printed.
Like a Real Krampus Mask, it has some Slits under the Eyes through which you can see, when you wear the Mask. The Mouth is open, so it has a much better ventilation than Latex or Silicon Masks. In order to wear it, all you need to do is to glue some Velcro or other Staps at the Backside. You can put some Soft Foam under the Top of the Mask, so you can make it fit to your Head.
3D printing settings
I recommend to use PLA for this Print, it will minimize the Warping, which will make it easier to glue the two Halfes of the Mask together.
For the Painting, i mainly used an Airbrush, but you can also use a normal Brush… go wild with your Paintjob, it’s a Fantasy Creature, everything is allowed 😉
Credits:
creaturesandtheming
Download 3D models
| File | File size |
|---|---|
3d-printed-krampus-mask
|
70 MB |