Airless Hockey Puck
Airless Hockey Puck
Print Profile(1)
Description
This model is 3 inches in Diameter and 1 inch tall. its thickness is 0.2 inches and the distance between the removed hexagons is 0.1 Inches. This model was printed in 2 parts and superglued together. I would recommend printing with a thicker brim to help support the outer curves. there are NO SUPPORTS NEEDED if you position the file on your slice correctly face down. I used PLA but I would recommend a very hard variation of TPU, this would make the model less prone to cracks or separation of the pieces.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
