Sunflower Puzzle 200x200 print in place

Copyright Claim

Sunflower Puzzle 200x200 print in place

Boost
94
92
8

Print Profile(1)

All
A1

0.08mm layer, 1 walls, 100% infill
0.08mm layer, 1 walls, 100% infill
Designer
8 h
1 plate
4.4(5)

Boost
94
92
8
0
98
17
Released

Description

Sunflower Puzzle 200x200 print in place

Hello my friends, this is a real sunflower print in place puzzle.

I hope you like it.

Follow filament swap settings below.

Thank you so much.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Green
At layer #10 (0.88mm) swap to Orange
At layer #20 (1.68mm) swap to Yellow for the rest.

Don't scale Z height

Comment & Rating (8)

Please fill in your opinion
(0/5000)

Print Profile
0.08mm layer, 1 walls, 100% infill
pas facile a faire mais très joli 👌
The designer has replied
1
Reply
merci beaucoup
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
Strength Issue:I love the idea, but this is by far the most frustrating puzzle I have ever solved. The black that serves as the base for the whole puzzle is very thin and the pieces don't snap together and the completed part sort of wobbles as you proceed with the image. I have a hard time just picking up the individual pieces from the table. Some pieces have a very small joints and damage easily. I think the idea is perfect, but it needs some improvements like larger joints and thicker base like 1-1,5mm
0
Reply
looks really cool but .3mf fails to open in prusaslicer. inviald code or something at line 21 when trying to open.. i run a mk4 not a bambo.
The designer has replied
1
Reply
Sorry I don’t know why Prusa slicer can’t open it
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
black base layer needs to be thicker
1
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
No more