Trash Bin Automatic by vajcnerd

vajcnerd

Household>Other House Models

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.24mm layer, 2 walls, 15% infill

Designer

2.8 h

2 plates

4.2(10)

Boost

145

179

248

Released

Description

Trash Bin Automatic! Uni scale! Push and Open!

Comment & Rating (21)

@moneybunny88

Great design, I enjoy opening the bin and closing it a lot :) I printed the pedal lying flat on the build plate (it was originally floating in the air). The pedal needed to be shaved a little to fit into the bin, but once it went in - it worked wonderfully. I recommend using classic wall with bambu studio, I tried Archane and the model came out with a lot of weird artifacts and gaps. Regardless, this is a very cute design and I tried to copy your color scheme :')

The designer has replied

@vajcnerd

I apologize for the inconvenience. I can make mistakes too. I'm glad everything worked out in the end:)

@wizardofoez

Print Profile

0.24mm layer, 2 walls, 15% infill

This is most leikely the first of many! Terrific design, works well. I had to glue the top part to the container, otherwise it would lift of when pushing the pedal. Need this in more colours for proper recycling on my desk. great print

(Edited)

The designer has replied

@vajcnerd

THANK YOU VERY MUCH!

@kennyheat

non-friendy 3D print design

The designer has replied

@vajcnerd

WHY??

@TimJuPe

Cool little design But on the plate things are floating - the design leaves room for printing improvements as there are unnecessary supports needed

@tj082349

We are using a Ps1 machine and we needed to move the push pedal on to a different plate, and moved it on it's side with organic tree supports. Otherwise we had 3 failures trying to print the pedal. All other parts printed well as it was designed.

The designer has replied

@vajcnerd

good day, I'm sorry, I've printed the model several times and always without problems, I use 3Dlac for better adhesion

@giulio.madlena

it’s literally impossible to print, truces 3 times and 3 times failed, cleaned the plate and then I’ve printed another object and it came out perfect, divide the parts into different plates and maybe this could be printed too, good idea but I repeat ‘INPOSSIBLE TO PRINT’

The designer has replied

@vajcnerd

I use 3D lac and it hasn't failed once, if it did please edit your profile. I wouldn't post it publicly if it didn't print for me.

@kennyheat

Print Profile

0.24mm layer, 2 walls, 15% infill

non-friendly 3D print

The designer has replied

@vajcnerd

rear supports are not used. I printed it several times and without any problems. if something floats, I recommend cleaning the printing plate with 3dlac

@ayaska

Print Profile

0.24mm layer, 2 walls, 15% infill

Great print! Had a little trouble with the little flat peddle that sticks on the underside- it would come off the print bed even after cleaning the bed. Added a brim and a couple of supports and it printed without problem. I think the issue was caused by the fact that this part has a slight curve and is placed partially in the air. Nevertheless, the model is absolutely adorable! Great job!!

@rachel.gamble20

Print Profile

0.24mm layer, 2 walls, 15% infill

I made it slighlty bigger, as big as the printer can handle. excellent designe

@giulio.madlena

Print Profile

0.24mm layer, 2 walls, 15% infill

impossible to print

@stevecary

Print Profile

0.24mm layer, 2 walls, 15% infill

Nice. Thanks!

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.