Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
ABS Overture Black Transmission Distance: 0.5
ABS k5 rosso basic Transmission Distance: 10
ABS sunlu grigio Transmission Distance: 3.3
ABS flashforge abs+ orange Transmission Distance: 9
ABS sunlu bianco Transmission Distance: 3.8

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to rosso basic
At layer #14 (1.2mm) swap to grigio
At layer #16 (1.36mm) swap to orange
At layer #21 (1.76mm) swap to bianco for the rest.