Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Lilac Purple
At layer #14 (1.2mm) swap to White for the rest.
Remember if you sant to scale, do it only with x and y axis, z must be the same as original.