LIGHTBOX SLURM

For assembly you will need:
- LED tape COB 70 cm long and 8 mm wide ( 12 or 24 volts )
- Glue for gluing the parts ( because of the complex shape of the body additionally you may need glue or hot melt glue, with their help you can strengthen the fixation of the COB LED strip, if you are not sure that your COB LED strip is well held after its installation glue it additionally with glue or hot melt glue )
- Connector or wire ( I used a 5.5x2.1 mm connector )
- Power supply ( Any power supply that will fit your COB LED strip, I used a 12 volt 12 watt power supply )
- Optionally you can use a button or LED strip dimmer ( I used an LED strip dimmer with RF remote )

I made this model as simple and versatile as possible, so that everyone can build using what they have at home or in the nearest store, so this model has no holes for switches, there is only a hole for the wire (maximum wire thickness you can use is 5 mm).
If you want to use a switch you can use a remote switch or a dimmer for LED strip.

All my models are for personal use only.

If you like my models and want to support me, you can subscribe to my cults and download paid models.

https://cults3d.com/en/users/ilnur_kharisov/3d-models