Phone stand -THE FRAME-

Hello

I would like to introduce you to my phone stand "The Frame".

Many of the community members have asked for a phone stand with interchangeable covers.

Here it is now.

If you want to have certain covers, just write to me, as long as they are feasible, I will create them on request.

Instead of printing 12 or 13 hours for a "colourful" phone stand, with dozens of filament changes, it can be done in a much shorter time.

The holder itself is printed in 74 minutes (with the settings that are relevant for me)

The inlays for the front and sides in 13min

The covers, depending on which one and how complex it is, up to 80min

There are 2 covers in this profile you can change your colours as you wish

• - US Flag
• - Bambu Lab Logo

There will be some more to follow, which I will post separately so as not to break the rules here.

There is also a storage box for the covers.

Print the covers facedown so that you have top results. The profile is designed for this.

Handling the covers is very easy. Place them on the slots provided and clip them in at a slight downward angle. To remove them again and use a different cover if necessary, simply slide the cover to the side and remove it. You can also insert 2 covers at the same time to increase the contact surface. Take a look at the pictures.

You can find out what else the stand has in the following text.

• - Speaker openings
• - More stability, even for larger phones
• - a small "lip" that prevents the mobile phone from slipping away at the front
• - Extension of the front lip, also for thicker phones
• - Recesses on the underside for gluing in small 8 mm rubber plugs

I think phone stands are just great. They are quick and easy to print and you can never have enough :-)

An AMS is needed here, but make sure the print bed sticks so you get a great and optimal result.

Just print out all the parts, press them together and you're done.

NO GLUING NECESSARY

If you find it as funny as I do, then I would be happy about a download and a thumbs up.

Have fun with the print

If you like my work/project consider supporting me with these options:

• leave a like
• leave a comment
• download the file
• or Buy me a Coffee

This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.

Have fun printing

TBG